whats the best?

Hair Removal Methods Do-It-Yourself Electrolysis
#1

hi people…im just looking around the net looking for home electrolysis machines and came across this forum

can i get some advice on what is the best home electolysis to use for a beginner, something that is easy to use, not too slow, affective, no scaring, etc. etc. etc.

any advice will be appreciated, thanks

#2

Electrolysis isn’t an easy skill to acquire, it takes a lot of practice. The risk of scarring has a higher chance of occuring with home electrolysis than professional electrolysis, again being down to the skill factor, lighting equipment and so forth.

Have you had a look through Andrea’s list of home machines, it may give you an idea?

Regards,
Benji

#3

and where can i find Andrea’s list of home machines?

#4

Was just a couple of threads down from this one. On the first post it will also give you a link to the previous post with other machines.

Regards,
Benji

#5

Since most people give up on Do-It-At-Home schemes, you should get something inexpensive to try it out (like a one touch) and if you still want to pursue the DIY course, then get a real professional machine and work your way up in the skill factor.

In any case, you will want to get electrolysis books and read up on this BEFORE you start poking at your skin. If you can only buy one book, make it Michael Bono’s “The Blend Method: Real World Electrology” which is simply called The Blend when being discussed. Although it is called the blend method, Michael has put together a book that dispite his intentions is the best teaching tool for all three methods, and therefore one can use it to begin with galvanic, move up to blend, and when one is ready, progress to thermolysis with the understanding of the contents of this book.

Of course, if one can find a really good professional, one would do better to just pay for the work. A good pro machine will cost $500 to $2,000 US dollars and doing good work fast doesn’t come quickly.

#6

I would start by getting the book James talks about. It helped me a lot. So did the two other books I read. Read as much as possible. Spend a lot of time researching before you start. Don’t go out and buy a $30.00 to $100.00 machine and expect it to work as a professional unit will. There is a reason why these machines cost thousands of dollars. A professional unit is the only way go. They can be found but take your time!!!

It takes a lot of time and effort but some of us diy’ers will
become PRO’s.

Good luck

#7

thanks alot for all the help guys, i’ll look into it